Southbend SEZ/3 User Manual download pdf (Page 30)

TROUBLESHOOTING SEZ SERIES COUNTERTOP STEAMERS

PAGE 30 OPERATOR’S MANUAL 1183437

TROUBLESHOOTING

Figure 13

Door Switch Continuity Check

1. DISCONNECT POWER AT CIRCUIT BREAKER.

2. Remove control panel.

3. Depress and release door switch actuator rod to make sure door switch is properly actuated.

4. Remove door switch lead wires from terminal block position 1 and terminal 5 of the controller.

5. Place test leads as shown inside the terminal connectors of the lead wires.

6. Check for continuity - (there should be NO continuity).

7. Depress door switch actuator rod and check for continuity - (there should be continuity).

8. Replace as necessary.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 51 52

No comments

Southbend SEZ/3 User Manual Page 30